Following Manual

 Remove backing plate from mirror housing.Open driver side door. Lower window.Remove triangular plastic cover on upper right-hand corner of door. Remove plastic cover on door handle. Remove screw behind plastic cover. Disengage and remove door handle. Warranty does not cover damage to the vehicle or mirror housing due to improper installation. Muth Mirror Systems, LLC (MMS) assumes no responsibility with regard to the accuracy of this information. MMS assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. Proper installation is the responsibility of the installer. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Remove screws from behind armrest. Remove push-pin from door panel between A-pillar and tweeter. Lift door panel and pull out partially. Unsnap all wiring connections and remove door panel. Unscrew the (3) bolts securing the mirror housing to the door and remove mirror housing.

Download: 2003-08 Toyota 4Runner Signal Mirror Installation Manual

The purpose of this TSB is to provide a quick reference to assist in making easy judgements regarding shock absorber and strut replacements.
Applicable Vehicles: 2006 – 2007 model year Toyota vehicles.
Condition: Slight oil seepage from oil seal case
Action: Normal oil evaporation — NOT necessary to replace the shock absorber

Condition: Moderate oil seepage from oil seal case
Action: Normal oil evaporation — NOT necessary to replace the shock absorber

Please Note: It is preferable to park on a flat surface, as you will have to engage and
disengage the hand brake and shift from gears to neutral. If you cannot do so and are obliged
to install the short shifter on a slightly inclined surface, place wooden blocks in front and
behind the wheels to prevent the car from moving while you’re working. Please read this
manual completely before beginning to work on your car.
Estimated Installation Time: 60 minutes shifter only, 75 minutes with base bushings
Tools required:
• Flat head screw drivers (small and large)
• Philips head screw driver
• Hammer
• Flash light or shop light **Recommended
• Needle nose pliers
• Rotary cutting tool (Dremel Tool) **Recommended
• Safety glasses
• Shop towels or rags
• Metric socket set (with 10mm, 12mm, and 14mm sockets) and a ratchet with extension
• Punch set (screwdrivers may be substituted)
• Bench Vise
• All purpose automotive grease (white Lithium based grease preferred)

Get the file Download here

Read more...