Following Manual

Rear lowering Kit Installation: 1. remove the under plate with the bike so that it can be placed in an elevator. Protect the motorcycle lift for motorcycles and motorcycle lift the rear wheel therefore is un-weighted. 2. remove the cover on the front of the drive shaft. Remove the regulator/rectifier.

This can be turned off during this procedure. 3. then remove the screw holding the spring shock to the suspension and then the two screws attaching the stock support arm (the arm support inventory only seems reduction kitwith our, but is slightly smaller). 4. install your new lowering arms, leaving a small respite screws. Install the shock spring back to the binding support. You may need to increase or decrease the rear tyre to get it to align correctly. 5. tighten all screws securely. Reinstall rectifier bracket, the regulator/rectifier and the lid of the axis. 6. Remove the motorcycle of the lift and testing that the suspension does not stick or bind.

Download Complete Suzuki M109 back download the Kit Installation Manual.