Following Manual

Browse » home» 1999 » a6 » and » audi » belt » manual » pdf » repair » sedan » service » timing » 1999 Audi A6 Sedan Timing Belt Service and Repair Manual

---

1999 Audi A6 Sedan Timing Belt Service and Repair Manual

1999 Audi A6 Sedan Timing Belt Service and Repair. Toothed belt, putting off and putting in Removing – Remove engine duvet (arrows). – Remove noise insulation panel (arrows). – Remove entrance bumper. Refer to Body and Frame/Bumper/Service and Repair – Move lock carrier to service place. Refer to Body and Frame/Radiator Support/Service and Repair – Remove ribbed belt. Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Serpentine Belt/Service and Repair See: Drive Belt/Service and Repair CAUTION: Mark the operating direction of the belt with a crayon or marker before taking away. Reinstalling a used belt in reversed working route could damage the belt. – Unclip toothed belt shield on both facets and put off. – Turn crankshaft via hand to TDC. Marks -A- and -B- must align – Check position of camshafts. Larger holes (arrow) of securing plates on camshaft sprockets need to be on inside and must align If they aren't in this position: Turn crankshaft one revolution additional. – Remove sealing plug from left-side of cylinder block.


Download: 1999 Audi A6 Sedan Timing Belt Service and Repair Manual